Press the knob in, turn anticlockwise to maximum and the burner will ignite. Before releasing knob, ensure a flame is established. If the burner fails to ignite, return to off position and try again.
During power failure or ignition failure, a match or lighting device can be used with caution. Do not operate for more than 15 seconds. If burner doesn't light after 15 seconds, stop operating and wait at least 1 minute before attempting again.
Please see attached instructions for complete details!
Compatible Cookware
Aluminum pan
Casserole
Ceramic pot
Enamel pot
Glass pot
Stainless steel
Tin foil
Medical stone
Burner Configuration
Warehouse Capacity
Monthly supply capacity: 3000 pieces
Total 4 warehouses covering 20,000m²
Frequently Asked Questions
What should I do if my gas stove won't ignite?
1. Check that the gas source is on (verify gas valve and meter are not in arrears/power off). 2. Check that the burner cap is securely in place and the flame outlet is not clogged with oil. 3. If the ignition pin doesn't spark, check if the battery (or power supply) is dead, or contact after-sales service (+86 13798034390) for a replacement pin.
Is it normal for the flame to be yellow or red?
Yellowing may indicate a clogged flame hole or insufficient air intake from the damper. Clean the flame cover and adjust the damper. Redness is usually caused by high humidity or excessive cooking fumes and is a temporary phenomenon.
How do I clean the burner cap and nozzle?
After the stove has cooled, remove the burner cap and use a fine needle to clear any carbon buildup in the burner holes. Clogged nozzles require specialized tools; avoid disassembling them yourself.
Ratings & Review
Overall Rating
5.0
Based on 50 reviews for this supplier
Rating Snapshot
The following is the distribution of all ratings
5 stars
0%
4 stars
0%
3 stars
0%
2 stars
0%
1 stars
0%
All Reviews
H
High Power Four Burner Gas Stove Camping Stainless Steel 4 Plate Gas Stove
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews